Showing posts with label reduction cut. Show all posts
Showing posts with label reduction cut. Show all posts

Saturday, September 26, 2009

Williams Lake Workshop

Williams Lake Workshop Sept 09Well, ladies & gentlemen, as you can see from the delay between last post and this, I've not been particularly active art-wise. The summer months, especially end of August, are taken over with work in the garden, and, as a result, work in the kitchen to put away all those goodies for the rest of the year. You can check out what I've been up to in the garden & kitchen (and a little R&R on the side!) on my other blog, Roman Life.

That said, I just came back from a trip up to my Dad's in Horsefly, and at the beginning of that trip was a fantastic weekend, hosted by the Cariboo Arts Society, where I taught an introductory relief printmaking workshop.

Williams Lake Workshop Sept 09
We started the weekend with a discussion of materials and tools used. For this workshop, I had insisted that everyone use the soft carving materials, like Safety Kut or Speedy Cut, for their blocks, because I find that most people are able to carve those materials fairly easily, especially if they don't have great strength in their hands. I showed them different tools to carve with, and of course discussed safety and sharpening (not that I'm the best instructor for sharpening!).

(C) Sylvia Pare 2009(C) Sylvia Pare

I'd asked everyone to bring some source material, and to choose something to work on that would just be black and white. I demonstrated how I transfer an image from my sketchbook or a photo by tracing onto onion skin tracing paper, then flipping that paper and rubbing the image onto the soft carving block. That automatically reverses your image so that the printed version will come out in the same orientation as your original drawing. This technique works beautifully for the soft vinyl composite blocks, but I haven't had much success with transferring to linoleum that way. As a result of the reversal of the image, we discussed the fact that what you're carving needs to be mirror-image of what you want to end up with on your paper. That always causes a bit of consternation, but if you've got your tracing to work from, and if the tracing paper is thin enough, you can always flip over the tracing paper so that you're looking through the back side of it, giving you the same image that is sitting on your block.

(C) Jo Ann Hamm 2009(C) Jo Ann Hamm

Everyone worked away at carving their blocks for a while, then I demonstrated rolling up the ink on the palette, building up thin layers rather than gobbing it all down in one go. People got really good by the end of the second day recognizing the sound of too much ink, or the feel of not enough ink. We were working with Speedball, and that was a bit of a disaster. It seized up almost immediately. I'd fortunately purchased retarder, which worked quite well, but it still gummed up pretty quickly. At the end of the weekend, I'd asked whether they'd rather have me provide better quality inks for a materials charge, and they'd all agreed that would have been better. The only problem is, of course, as one student pointed out, that they wouldn't have known about the challenges of working with Speedball, and might not have understood the value of having better ink provided for a charge. The other problem is that most people have easier access to Speedball, whereas all other water-soluble inks are mail order only from the States, and that definitely gets a bit pricey, and I certainly wouldn't have wanted to ask people to purchase their own inks first in that case. I didn't want people to use oil-based inks for this workshop, mostly because the smell makes me sick, and I didn't feel like having a huge sinus headache the whole weekend!

Lynda Sawyer & Leslie Lloyd 2009(C) Leslie Lloyd & Lynda Sawyer

While everyone was working on their black & white images, and proofing, and printing, I went on to discuss some simple options for adding colour. You can print on papers that are different colours: everyone tried printing on black paper, using either straight white, or inks that had a bit more white mixed in. Some people had small enough images to try out the Mr. Ellie Pooh Paper samples in shades of lavender, golden orange and natural, that I'd brought. Then we discussed using different coloured inks, and I demonstrated a couple of options. Obviously, just a single colour of ink pre-mixed on your palette, then rolled up onto the block is the simplest, but I also showed how you can use the inks in a more painterly manner, by using multiple brayers and selectively adding colour to the image, like I had done for this print. We also discussed using the back of the block to do a solid colour first, then ink the carved image in another colour, and printing that on top (like this one). Finally, I demonstrated the "rainbow" or blend roll (as I had done in this recent print), and provided everyone with a copy as a sample for their records. Everyone tried their hand at different techniques, and came up with some lovely results.

Williams Lake Workshop Sept 09
At the end of the day, I discussed the reduction cut method to create a multiple-colour print carved from a single block. I explained the process, then asked them to think about an image they'd like to use, and to work out what the light, middle and dark value shapes were in that image. Then I asked that they do a tracing of each set of shapes, separately, so that they could consider how they might have to break down the image for carving the next day. I also suggested that they think about what colours they wanted to use, keeping in mind the values they'd need to achieve with those colours, and maybe write them down on the separate tracings.

(C) Leslie Lloyd 2009(C) Leslie Lloyd

We reconvened the next morning, and everyone had either brought value sketches or tracings of what they wanted to work on. I reviewed the process, and suggested that everyone start with carving away whatever they wanted to remain the colour of the paper. One of the students wished to start with a solid colour, so she inked up the back of her block and printed a series of those first. I made sure that everyone was aware that they should decide how many prints they wanted to end up with in their edition, then add at least another 3 or 4 to that for margin of error.

(C) Lynda Sawyer 2009(C) Lynda Sawyer

Before everyone started inking and proofing, I went over a few different registration methods, including the simplest one of positioning the block on the paper, then flipping everything over to burnish the back of the paper to transfer the print. I also showed them how to do T-bar registration and how to use two right angle corners to align first block then paper repeatedly. Everyone decided that simple was best, and chose the first option for their registration, and it worked very well for almost all of their prints, such that very few were spoiled due to mis-registration.

(C) Sylvia Pare 2009(C) Sylvia Pare

Some students stuck with just three colours: paper as the lightest value, a mid-value, and a dark value, but a couple were very brave and printed three or four colours. One even printed I think five!! Ideally, they should have allowed the inks to dry longer between prints, but the one student who printed the most layers was happy with the textures that were achieved by overprinting still-tacky ink. At the end of the day, everyone managed at least a two-colour reduction, and many went even further. Again, I worked on a demo piece which I sent home with them as a sample for reference to the reduction method.

(C) Kathryn Steen 2009(C) Kathryn Steen

I was absolutely blown away by the enthusiasm of the students, and their intense focus during the whole weekend, as well as their incredible productivity. Everyone went home with many prints, and with a better appreciation of the relief printmaking process. I am very pleased with the results, and am very grateful for the opportunity to have worked with such a talented crew. I hope they invite me back so that we can play with printmaking some more!!

(C) Kris Andrews 2009(C) Kris Andrews

Thank you, Cariboo Arts Society, for the opportunity to share some of my knowledge and experience.

(C) Jo Ann Hamm 2009(C) Jo Ann Hamm

Monday, May 18, 2009

Blog 10,000!

Thank you, ladies & gentlemen, for the 10,000th visit this week, to this blog!

I'm just back from a weekend camping trip and have a pantload of non-art work to catch up with, but I am going to the opening of the Open Print Exhibition this Thursday, May 21, from 6-8 pm at the Federation Gallery on Granville Island - I shall post about that after; both Mom & I have work accepted, and this is Mom's first second (sorry!) juried show acceptance:

Stable Mates
reduction block print
Daniel Smith water soluble inks
© Betty A. Cavin

Amie Roman as burnishings on FlickrPays d'Hiver
linocut print
Daniel Smith water soluble inks on grey Rising Stonehenge paper
© Amie Roman

Hope to see you at the opening!

Wednesday, May 13, 2009

Go with the Flow

I am pretty sure that my Exposed print is of sufficient value to cover the "cost of entry" to the Oceans of Art exhibition at the Nanaimo Art Gallery, opening reception on Thursday June 11, 7-9 pm; however, I also thought that a few smaller pieces may be appreciated, as it can sometimes be difficult to sell large pieces.

I had done a sketch of a piece of kelp (Macrocystis) that I'd photographed on Brady's Beach that I've had sitting in the back of my mind since I did it, with the intention of a reduction cut.

I started off with a yellow ochre layer (didn't photo it), then later did a separate set of prints with a blend (rainbow) roll using yellow ochre, carbazole violet, and phthalo green:

Amie Roman as burnishings on Flickr

Flow II
MDF block print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

and then for some reason, printed the remaining ink on the block (not reinking the block) over the ochre layer and got this:

Amie Roman as burnishings on Flickr
Flow I
MDF block print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

After I finished enough prints for editions for those two, I decided to mess around a little and ended up with these two monoprints:

Amie Roman as burnishings on Flickr
Flow VI
MDF block monoprint, Dremel carved
Daniel Smith water soluble inks on white Rising Stonehenge paper
© Amie Roman

Amie Roman as burnishings on Flickr
Flow VII
MDF block monoprint, Dremel carved
Daniel Smith water soluble inks on white Rising Stonehenge paper
© Amie Roman

Then I got to the part that I'd really intended all along! I carved another layer for the reduction (only one; I wanted to keep it very simple). I printed over some of the Flow I prints (but kept some set aside for their own small edition):

Amie Roman as burnishings on Flickr
Flow III
MDF block reduction print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

And then, of course, had to print over some of Flow II, too (also setting aside some of them with only the first blend roll for their own small edition):

Amie Roman as burnishings on Flickr
Flow IV
MDF block reduction print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

This second, carved layer was also a blend roll, but subtle to see, except for in the edition I did on its own:

Amie Roman as burnishings on Flickr
Flow VII
MDF block print, Dremel carved
Daniel Smith water soluble inks on white Rising Stonehenge paper
© Amie Roman

There are so many things about this series that I'm absolutely tickled by:
  1. The simplicity of the carving is exactly what I had wanted to achieve, and very effectively reflects the gorgeous lines and shapes of the Macrocystis frond that I'd sketched.
  2. The success of the rainbow roll in capturing the oil-slick colours of a slightly decaying, washed up piece of kelp on the beach.
  3. The subtleties in value contrasts between II and III which again, really captures the ever-changing colour shifts of a washed up piece of kelp on the beach.
  4. I got to do a series!! And I played a lot, both with the colour and the printing.
Plus, my baby press is an utter jewel. Love it!

Oh, yeah, and I'd just invested in a set of Foredom ceramic rotary tips for my Dremel tool, and they are absolutely fabulous for carving the MDF in the way I want to.

As you can see, I had a very productive couple of days last week. I won't be donating each of these, but I'll pick a couple to frame up and add to the show.

Now I'm going to be away from the studio for at least another week or so, but hope to get back to it when I return, as I've got lots of ideas that I'd really like to work on.

Sunday, May 10, 2009

Award of Merit

Amie Roman as burnishings on FlickrBeing Shod
reduction relief print - MDF carved with Dremel
Daniel Smith water soluble inks on Rising Stonehenge
© Amie Roman


I have been honoured with an award of merit from the Delta Arts Council's artSpacific exhibition for my piece, "Being Shod". My thanks to the jurors who chose my piece for this award, and my congratulations to the other artists whose work was also recognized at the event. It's the first time I've received a juried award, so I'm very thrilled (although one of my paintings was chosen in a wine label viewer's choice event, and that was also pretty exciting).

If you're able to get to see the show, it is at the Firehall Centre for the Arts (11489 84 Avenue, Delta), until May 29, open 10am to 4:30pm.

Monday, January 5, 2009

Printsy Blog

'Pink Skies in the Morning' etching à la poupée, by Mariann Johansen-Ellis, on Flickr


OK, I just had to share this interview: Mariann Johansen-Ellis is a delightful and talented printmaker who works in Spain and Singapore, in etching and linocut. She does these whimsical, imaginative prints using the method of à la poupée to colour her intricate etchings, and, an artist after my own heart, she also does incredibly detailed reduction linocuts.


Please read her interview on the Printsy blog here.

Also, here are a couple of exceptionally instructive videos that Mariann has uploaded to YouTube; have a watch:

On Reduction Linocut



(I want her roller!! That would make roll up so much less tedious!!!)

On Etching



Mariann says that she enjoys teaching (I understand how she feels!), and you can tell from her videos that she's very methodical about her process. I suspect she'd make a great teacher.

Friday, January 2, 2009

Koi - experimenting with inks

I received some sample ink colours (yellow ochre, Cadmium primrose yellow, Cadmium red medium light, and I think one more, but I can't recall what it is now!) from Faust in their AquaLine series of water soluble inks (see here and here for my ink trials where I included Faust inks). I was in conversation with Peter Faust about wanting some other colours, and he again very generously sent me some samples to play with. I believe I received the inks in spring. I didn't get around to trying this until the summer. I was kind intending on blogging about this as soon as it was finished, but when I'd done my "last" layer, I didn't think it was finished, so I put it away until this week. When I pulled it out and had a look at it again, I decided that it was as finished as it was going to get, that I was happy enough with it to edition, and that I might try again but using the MDF in future. Again, this was printed with the black linoleum, which, I now understand, stretched under the pressure of the press (this was the first edition I did on the big press, I believe).

The purpose of this print was twofold: to experiment with my lovely new sample inks, and to try to create a print using very translucent colours. I really wanted the colours of all the layers to come through. Well, I succeeded, and hoped that the final colour would be more opaque, but it wasn't. As a result, the sloppy, er, selective inking that I'd done with the rather opaque cad red showed through more than I wanted.

OK, so here's the WIP:

The first layer is far too pale to see well in the photo, but it was enough to let some of the paper show through. It was a very subtle layer of mostly transparent medium with a touch of pigment, I believe the cad primrose.

The second layer is selectively inked to just add some darker primrose to the body:

The third layer is primrose with a touch of cad red, again just selectively inked on the head:

The fourth layer is now starting to show the volume of the image, the shading of the under-parts, and defining the fins. This is a very translucent layer with a hint each of ultramarine and raw umber:


A slightly darker fifth layer, continuing with the previous idea, with a little more ultramarine in the mix:

The sixth layer is primarily transparent medium, with some cad red:

I thought the red would be covered by the final layer, you can still see some of the rough brayering in the background. I sort of fixed it by brayering a bit more red all around the background, which made it less blue than I'd hoped, but here's the final layer (I think mostly ultramarine and raw umber but also some transparent medium:

As I said, the print worked well enough for an edition, albeit small (only five). I really like the way the translucent layers work. I'd like to try again, but a little more careful application of the brayer next time, or perhaps two blocks (which likely is what I should have done in the first place!). I shall be shipping one of these to Faust to thank them for their samples.

Being Shod - lessons in printmaking

The original photo for this print was taken by my grandfather. Mom has a number of wonderful old photos taken by her dad, as well as her mum's dad, and I'm hoping to translate some of them into prints. This photo was of a horse being shod in a logging camp. The background was pretty over-exposed, so I wasn't really able to get much good detail. So I didn't know what to do when I first started off; you'll see the background in the sketch is pretty vague.


Lesson #1 - decide on a background before you start carving. Because I hadn't decided on a background, I figured the first colour would make up the background by itself:


As a result, I changed my mind about the values in the drawing as I was working on the second layer. Then I decided on the background: I'd make it into the interior of a barn.

Lesson #2 - don't change your mind about values in the middle of carving.

As a result of changing the mind about the values, you'll see that the lightest value falling in front of the back leg of the horse is really high contrast, and not a great value choice. Also, by changing my mind about the background in mid-carving mode, I've got a "halo" around the subject matter, which really is a beginner relief printer's mistake. The background should define the foreground, and vice versa, without having to outline everything.

Lesson #3: Sometimes you can fake it to fix mistakes. I took a little bit of the first colour and dabbed with my fingertip over the light part that bothered me. Then printed the third and final layer on top:


The end result is much improved; you can't tell that I made the fix, and it makes the image read so much better. Once again, I am happy with this print; I seem to be on a roll this week! Good thing, because I'm going to be away from the studio (and press!) for the better part of January. I was trying to cram in as much as I could manage this week.

Once again, this print was carved in MDF with a Dremel, printed using Daniel Smith w/s relief inks on cream Rising Stonehenge paper. I think the dimensions are about 9"x7", and I managed a final edition of 6.

Thursday, January 1, 2009

Pig finished

I spent the last few days finishing off the pig print, and it's finally done today. The more I work with the MDF and the Dremel tool, the happier I am with them.

This print was done with the Daniel Smith water soluble relief inks. I am very happy with their performance, too. I don't think that those inks were slipping during my Xocoatl print, but I am now positive that it was the black linoleum stretching instead. It's printed onto cream Rising Stonehenge paper; the colours of the photos are a little off. So if you look at the paper as being cream, that'll give you an idea of what the print should look like; these photos are a little too cool/blue.

The second colour was a pink made by mixing some permanent red and a little yellow ochre into the pink I'd used in the first layer.

The fourth layer is about 50/50 ink/medium mix, with mostly yellow ochre and a very little amount of burnt umber. I wanted the pink to come through more than if I'd just used yellow ochre straight out of the tube.

The final layer is a dark brown made up of quite a mix: there's a wee bit of phthalo blue, some yellow ochre, burnt umber, and a bit of mars black.


I'm very pleased with this print. I feel that I really captured the pigginess of the sow. I really like the colours that I used, too.

Tuesday, December 30, 2008

Work in Progress - Pig

For the last couple of years, we've been going to the local agricultural fairs in the autumn. It's great watching the kids with their animals, plus I take all sorts of heavy equipment (usually heritage tractors) photos. Mom took a few lovely pictures of a sow and her piglets, and this print is from the "extreme closeup" that she took. I think that the print is about 5" square (give or take). Here's the original sketch:


Unfortunately, the following are craptastic photos. I apologize. I'll scan the final when it's dry enough. Our studio only has natural light (great, but insufficient in winter for photography) and overhead fluorescent lights. Everywhere you stand, you cast a shadow over whatever you're working on. Ugh. But I have a great studio, and a great press, so I can't complain too loudly! Anyway, the first layer is a pale pink, second is a light blue. The print is on cream Rising Stonehenge paper, using Daniel Smith water-soluble relief inks.

First layer

Second layer

I am having a lot of fun with the Dremel, and am extremely impressed with the level of detail I can achieve. It sort of feels like I'm cheating, but what the heck!

Fruit Alphabet Exchange Spoiler - Part 3

I have finished the last two colours on the print! They look pretty darned good, but were a little tricky to do simultaneously. Worth the fiddling, though, because now it's done!!

Keeping with the lighter colours that I'd started with printing (rather than the bold ones from the original design), I did a light, spring green and a slightly light orange-red.



Rolling up the two colours was mostly easy, with a few places I had to be very careful where the brayer went on the block. The final little dot of red on the tip of the crown was added by just dipping my fingertip into the rolled out ink on the slab and dabbing it onto the block at the end of the roll up.

The alignment continued to work really well for this print; most of what I printed are worth keeping from an alignment perspective (a nice change from my last exchange print for Four Oceans Press!). You can see on this photo that there's a lot of "noise" on the block: areas which are proud enough to catch the ink from the brayer.


When hand-burnishing, this can be very challenging to avoid and/or clean up. When printing with the block placed first onto the press bed, then the paper on top, the "noise" can get picked up as the press somewhat shoves the paper into the recesses of the block. This technique of placing the paper on the press bed, then the block on top, eliminates the worry of picking up accidental ink from the recessed areas.

So I'm quite pleased overall with the final image:



I took a course on composition this past fall with Lalita Hamill (who is, by the way, a fabulous instructor and very knowledgeable about composition) through the Federation of Canadian Artists. We discussed the use of colour as a design element: a tool to help the viewer's eye be led around an image, or be drawn to a focal area. Red is for areas of focal interest, yellow helps to move the eye around, and blue can be used as a boundary, or rest area for the eye, or as a contrast. Of course, these are huge generalizations, but they're interesting to keep in mind.

I tried to thoughtfully utilize colour in this image. Part of the colour choice was, of course, related to the subject matter: for example, in order to symbolize Quebec with the fleur de lis, the colours really needed to be white and blue. Do you think that the colour use in this piece helps to move your eye around it? What do you find that you look at first? How about the path your eye takes around the piece?

One of my favourite uses of colour in this is the touch of red in the quince; that little hit of warmth, as well as the fact that the only bit of gradient carving occurs there (everywhere else is solid colour block), helps to bring attention to the quince, which is, essentially, the point behind this piece. The queen's direction of gaze also draws an imaginary line to the quince, another device to draw the viewer's eye.

I find this piece quite fun. There's a lot of stuff to keep you interested. All of the symbols that I ended up using for Q were:

Quince (of course!!)
Queen
Quill
Queue (her braid)
Quercus (oak leaves & acorns)
Quilt
Question
Quebec

Did I miss any? I hope the participants in the exchange enjoy the print in their collection as much as I enjoyed developing it.

Saturday, December 27, 2008

Fruit Alphabet Exhange Spoiler - Part 2

I started work on the actual print this week, in between snow shoveling. Dave had a bunch of MDF (medium-density fibreboard) that he said I could use, so I was keen to give it a try. He also bought me a FlexShaft for our Dremel rotary power carving tool. The FlexShaft is an extension of the tool that has a smaller diameter so that its easier to hold. It's also more maneuverable. The Dremel powers the extension piece, so you can carve easily without worrying about bumping the power control while carving, and it's lighter to use so your hands don't get tired quite as fast.


I did a few modifications to my original design. I liked the look of the crown, but then Dave reminded me that oak (Quercus species) starts with Q too, so I changed her crown to be one of oak leaves & acorns. I transferred the image to the MDF block by tracing the image with graphite paper (kind of like old-fashioned carbon paper, but less messy and much finer results). Unfortunately, the transfer wasn't quite strong enough, so I redrew the traced image with a pencil.


Then I revved up the Dremel & Shop-Vac and went to work.


Here it is inked up with the first ink colour:


I wanted to do this print on black paper, but that has its limitations. I find that the ink has to be pretty opaque to layer well. I don't quite have the patience to layer enough ink on for a purely opaque first layer, so the end result was a little grainy:


It actually looks pretty cool - kind of like stone. So, there it sat, drying, while we did more shoveling. And stuffed ourselves with Christmas fixings.

Next layer was the blue. I had originally planned on really bright, intense colours, but I changed my mind when doing the actual print; I figured that intense colours would likely be lost a little against the dark paper and grey background. So I tinted the colours down a bit.

The second layer was blue; I didn't want to remove all the non-blue elements of the block, because I'd need them later. It didn't really matter which colour I did next, but I figured blue was the easiest to create a mask for, as it represented large, solid areas on the print. I took one of the less than brilliantly printed ones and cut out the areas to be blue with an Exacto knife. I flipped the print over and masked the block so that I would only ink the parts exposed by the mask in blue.


Here's the block inked:


I thought I'd try a different registration method (why do I do my experimenting when I have to send the prints out to other printmakers?). I'm not usually very good at dropping the block onto a piece of paper, but this block, because it was thick, was easy to line up against the print and then gently lower down to the paper. Usually, I place the block on the press bed, then lay the paper on top. Using the paper on the press bed first then placing the block on top seems to work really well, at least with the thick MDF blocks. You can see that the design makes it easy for me to align the block with the print; there are carved lines that extend to the edge of the print (and block) which I can align.


Another benefit to laying the block onto the paper is that the paper doesn't get pressed into the block; so if the carving is low enough, but the brayer drops into the carved-out areas and leaves ink, then it doesn't print (yay!). You can see on this image the rough bits that are inked:


yet they didn't print:


I had to set up the block on the press with something to help keep the roller from running off the block or bumping up onto the block. I don't know that it would damage the press, but I can't imagine that it would be good for it.


Once again, the press worked absolutely beautifully. And this time I was using the Faust AquaLine inks, so I can't give any further thoughts about slipping yet. I'll try the DS inks at some point with the MDF to see how it goes. So far, the print is progressing very nicely. I have to wait a couple of days for the inks to dry before the last layer, where I'll try to do the two final colours at the same time.