Showing posts with label monoprint. Show all posts
Showing posts with label monoprint. Show all posts

Wednesday, May 13, 2009

Go with the Flow

I am pretty sure that my Exposed print is of sufficient value to cover the "cost of entry" to the Oceans of Art exhibition at the Nanaimo Art Gallery, opening reception on Thursday June 11, 7-9 pm; however, I also thought that a few smaller pieces may be appreciated, as it can sometimes be difficult to sell large pieces.

I had done a sketch of a piece of kelp (Macrocystis) that I'd photographed on Brady's Beach that I've had sitting in the back of my mind since I did it, with the intention of a reduction cut.

I started off with a yellow ochre layer (didn't photo it), then later did a separate set of prints with a blend (rainbow) roll using yellow ochre, carbazole violet, and phthalo green:

Amie Roman as burnishings on Flickr

Flow II
MDF block print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

and then for some reason, printed the remaining ink on the block (not reinking the block) over the ochre layer and got this:

Amie Roman as burnishings on Flickr
Flow I
MDF block print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

After I finished enough prints for editions for those two, I decided to mess around a little and ended up with these two monoprints:

Amie Roman as burnishings on Flickr
Flow VI
MDF block monoprint, Dremel carved
Daniel Smith water soluble inks on white Rising Stonehenge paper
© Amie Roman

Amie Roman as burnishings on Flickr
Flow VII
MDF block monoprint, Dremel carved
Daniel Smith water soluble inks on white Rising Stonehenge paper
© Amie Roman

Then I got to the part that I'd really intended all along! I carved another layer for the reduction (only one; I wanted to keep it very simple). I printed over some of the Flow I prints (but kept some set aside for their own small edition):

Amie Roman as burnishings on Flickr
Flow III
MDF block reduction print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

And then, of course, had to print over some of Flow II, too (also setting aside some of them with only the first blend roll for their own small edition):

Amie Roman as burnishings on Flickr
Flow IV
MDF block reduction print, Dremel carved
Daniel Smith water soluble inks on green kitakata paper
© Amie Roman

This second, carved layer was also a blend roll, but subtle to see, except for in the edition I did on its own:

Amie Roman as burnishings on Flickr
Flow VII
MDF block print, Dremel carved
Daniel Smith water soluble inks on white Rising Stonehenge paper
© Amie Roman

There are so many things about this series that I'm absolutely tickled by:
  1. The simplicity of the carving is exactly what I had wanted to achieve, and very effectively reflects the gorgeous lines and shapes of the Macrocystis frond that I'd sketched.
  2. The success of the rainbow roll in capturing the oil-slick colours of a slightly decaying, washed up piece of kelp on the beach.
  3. The subtleties in value contrasts between II and III which again, really captures the ever-changing colour shifts of a washed up piece of kelp on the beach.
  4. I got to do a series!! And I played a lot, both with the colour and the printing.
Plus, my baby press is an utter jewel. Love it!

Oh, yeah, and I'd just invested in a set of Foredom ceramic rotary tips for my Dremel tool, and they are absolutely fabulous for carving the MDF in the way I want to.

As you can see, I had a very productive couple of days last week. I won't be donating each of these, but I'll pick a couple to frame up and add to the show.

Now I'm going to be away from the studio for at least another week or so, but hope to get back to it when I return, as I've got lots of ideas that I'd really like to work on.

Saturday, February 21, 2009

Bruce Waldman

Thanks to Elana Goren over at Spider Ink Studio, I have been introduced to another incredible printmaker (they're just everywhere! only academia would dare breathe that printmaking is dead! pbtht!). Bruce Waldman's monotypes (well, he calls them monoprints, but since they don't appear to involve a plate or block that's been etched, carved or altered in anyway, I would maintain they're monotypes) are apparently made with the edges of brayers.

For those non-printmaking folks out there, here's what a brayer looks like, via Wikipedia:


Bruce has very kindly provided me with a description of his process to share with you. It's fascinating:

I work on a large piece of Plexiglas and tape a white piece of paper to the back so that I can clearly see my image while I am working it up. I use only oil based printing inks; mostly etching, but sometimes combined with litho. I use the inks straight out of the container, and do not add oil or any kind of thining substances or solvents to thin the ink. I draw and apply the ink to the Plexiglas directly with small rubber rollers of varying widths, using the flat part of the roller for larger areas, and drawing with the edge of the roller for line work. It is hard to control drawing with the rollers, so it forces me to draw and paint on the Plexiglas in a spontaneous manner, not trying to tightly control my lines and marks while I am making them.

Bruce Waldman - 'Horserace'
If I don't like parts of the image, I just wipe them away and redraw them. I work both dark on light, and also pull lights out of dark areas with a cloth or paper towel, and then press inked textures and materials on to the image. Sometimes they don't completely work when I print them, so I pin them up on the wall and work directly back into them with printing inks, rollers, pressed textures, and brushes. I only use one plate, and only run it through the press once.

Bruce Waldman - 'Guy Pointing'This is a very direct and raw way to work. It is really for people who are not that interested in complex techniques, and who love to draw and paint directly and spontaneously. I usually create many bad prints before I get a few that I am really happy with. I love working this way because it allows me to attack the plate with a reckless abandon, which gives the images a feeling of wild motion. I developed these techniques over many years of experimentation as a reaction to creating hundreds of small, intricate, and technically complex ethcings; which I also tremendously enjoy making.Bruce Waldman - 'Rhino'

Thanks, Bruce, for the great summary of your process, and for generously letting me show a few of your prints. I have a very tiny selection here, so go check out more of Bruce's prints.